Updated October 2026
Quick answer
A commercial electrician in Oklahoma City handles service calls and small projects for businesses: dead circuits and tripping breakers in stores and restaurants, office lighting and receptacle work, equipment connections, and panel and service work that has to be coordinated with the utility and the landlord. The line is answered 24/7, and planned work is scheduled before opening or after close.
Service calls versus build-outs
What a commercial service call covers
Most commercial work is not a big build-out. It is a walk-in cooler circuit that trips every afternoon, a row of parking lot lights that went dark, a new espresso machine that needs a 240-volt receptacle, an office that wants its lighting on occupancy sensors, or a panel full of breakers nobody has labeled since the last tenant. These jobs need a fast answer and an electrician who understands commercial equipment and three-phase service.
We keep commercial calls moving. The line is answered around the clock, urgent failures that stop a business from trading go first, and anything that can wait is scheduled before you open or after you close. We leave accurate panel labels and a short written summary, because the next person to open that panel may be on a night shift with a line out the door.
What moves the price
What sets the price of commercial work
- Urgency After-hours emergency calls cost more than scheduled work.
- Access and hours Work before opening or after close.
- Three-phase equipment Heavier gear and more complex protection.
- Panel condition Unlabeled or overloaded panels take longer to trace.
- Lift or height Warehouse and lot lighting need a lift.
- Landlord requirements Some centers set their own rules and contractors.
- Permits Larger work is permitted and inspected.
National 2026 figures put electrician labor at about $75 to $150 per hour and service calls at about $79 to $179. Commercial work is quoted per job.
Sub-jobs this page covers
The commercial calls we take most
Retail and restaurant service calls
Stores and restaurants call with the problems that stop trading: a register circuit down, a cooler or freezer tripping, a hood fan dead, half the dining room dark. We find the fault, restore the circuit and tell you whether it is a one-off or a sign of something larger, such as a kitchen outgrowing its panel. For restaurants we check that equipment circuits match the nameplates, because a fryer or oven on an undersized circuit is a common cause of repeated trips.
Office lighting and circuits
Offices need receptacles where the desks are, lighting that meets the energy code with the controls it expects, and circuits that do not trip when every monitor and heater is on. We add circuits for new layouts, convert old fluorescent fixtures to LED, add occupancy and daylight sensors, and label the panel so facilities staff can find what they need. Work is done after hours or in sections so the office keeps running. Every change is added to the panel schedule, so the next tenant or facilities manager is not left guessing which breaker feeds which room.
Panel and service work for businesses
Businesses outgrow panels as equipment is added. We run load calculations, add subpanels, replace failing breakers, correct panels mislabeled by past tenants, and plan service upgrades with the utility and the landlord. Three-phase equipment such as compressors, kitchen gear and shop machines gets checked for proper supply and protection. Where a service upgrade is needed, we schedule the outage for the least disruptive window. We also correct panels where old breakers have been replaced with the wrong type or size, a common finding in older strip centers and suites that have changed hands several times.
Oklahoma City conditions
Service upgrades and the utility for businesses
Commercial service upgrades and meter work in the Oklahoma City metro run through OG&E: the utility has to disconnect and reconnect service, and for businesses that means choosing the outage window carefully. We book that coordination at the same time as the permit and inspection, and we plan around trading hours so the power is off when the doors are closed rather than during the lunch rush.
Business circuit down?
Call any hour. Outages that stop trading go to the front of the line, and planned work is scheduled around your hours.
Warning signs
Problems a business should not wait on
- Breakers that trip at the same time every dayA circuit carrying a load it was not sized for.
- Coolers or freezers trippingLost stock is close behind.
- Warm breakers or buzzing panelsA failing connection.
- Lights flickering across the floorA loose neutral or service problem.
- Burning smell in a kitchen or back roomShut the equipment off and call.
- Outlets dead after a power blipA tripped GFCI or a failed device.
- Parking lot lights out in groupsA timer, photocell or buried wiring fault.
Step by step
How a commercial call is handled
- Answer and triage
What is down and whether trading has stopped.
- Find the fault
Circuit traced, equipment and supply tested.
- Restore or make safe
Fixed on the spot where possible.
- Plan anything larger
Scheduled around your hours with permits.
- Label and summarize
Panel labels corrected, short written summary.
Questions we get about this job
Commercial electrical questions
Yes. The line is answered 24/7 and outages that stop a business from trading go first.
Yes. Most planned commercial work is scheduled outside trading hours.
Yes, including supply, protection and connections for commercial equipment.
Yes. See our tenant build-out wiring page for full suite projects.
Yes. We trace circuits and write a panel schedule that matches the space as it is now.
Yes, including landlord electrical requirements and approved contractor rules.
Service calls often do not; new circuits, panels and service upgrades do.
Same category
More outdoor and commercial work
Patio & Outdoor Kitchen Wiring
Covered patio outlets and fans and more.
See PatioLightning Protection Systems
Air terminals and roof conductors and more.
How we handle Lightning Protection SystemsRV Outlet Installation
30 amp RV outlets and more.
RV Outlet InstallationStorm Shelter Electrical
Shelter lighting and outlet and more.
About Storm Shelter ElectricalNeed an electrician who works around your business?
Call any hour. We restore what is down fast and plan everything else for before you open or after you close.