Emergency & Troubleshooting
Sparks, smells, half the house dark, breakers that will not hold. Diagnosis first, then the repair.
Jump to 7 servicesOklahoma City electricians, answered 24/7
Electrical problems in Oklahoma City, fixed by the crew that finds the cause first
A breaker that will not hold, lights that flicker, a panel with no room left. Our electricians work from a service office in south OKC and a head office in Bethany, and the line is answered around the clock.
Call (405) 358-8323 Browse services
- Answered 24/7
- Service office in south OKC
- Permits filed for you
- Storm and outage work
Circuit directory
Tap the one that matches your houseBreaker keeps trippingOverloaded circuit, a failing breaker, or a short that needs finding.Lights flicker or dimLoose neutrals and tired connections, common in 1960s and 70s homes.Burning smell or hot outletStop using the circuit and call. This is the one we roll on first.Dead outlets on one wallUsually a tripped GFCI or a backstab connection that let go.No power after a stormBent mast, burned meter base, or a service drop on the ground.Panel is full or 100 ampsNo open slots, a Federal Pacific label, or a new EV or range on the way.Need a Level 2 chargerA 240V circuit sized for the charger and the panel it hangs off.Want power during outagesStandby generator, interlock kit, or a battery for the essentials.
Main line, answered 24/7(405) 358-8323Brands on our trucks and in our installs include Generac and Kohler generators, Square D and Eaton panels, and Tesla and ChargePoint chargers.
GeneracKohlerSquare DEatonSiemensLevitonLutronTeslaChargePointEnphaseKiddeHubbellGeneracKohlerSquare DEatonSiemensLevitonLutronTeslaChargePointEnphaseKiddeHubbellGeneracKohlerSquare DEatonSiemensLevitonLutronTeslaChargePointEnphaseKiddeHubbell
The short version
What an electrician in Oklahoma City actually handles for you
Quick answer
Electricians in Oklahoma City answer this line 24/7 for tripping breakers, dead outlets, 200-amp panel upgrades, EV chargers and standby generators. The electrician comes from our service office on the south side, finds the fault before quoting any parts, and pulls the permit through OKC Development Services whenever the job needs one, from a single breaker swap to a whole-house rewire.
Amped Up Electric runs the phones and the trucks itself, so the person who answers at 2 a.m. can tell you which breaker to switch off while an electrician is on the way.
Panels & Power
200-amp upgrades, Federal Pacific and fuse box replacements, subpanels, surge protection and dedicated circuits.
Jump to 10 servicesPanel schedule
All 54 services, numbered the way a panel directory is
Odd circuits on the left, even on the right, grouped by the system they touch. Every line opens the page that explains the job, what changes the price and how long it takes.
Emergency & Troubleshooting
7 circuitsPanels & Power
10 circuits8Electrical Panel Upgrade9Federal Pacific & Fuse Box Replacement10Subpanel Installation11Whole-Home Surge Protection12Dedicated Circuit Installation13Grounding & Bonding Repair14Electric Water Heater Wiring & Repair15Electric Heater Installation16Mobile Home Electrical Service17Industrial Electrician
EV Chargers & Backup Power
7 circuitsLighting & Fans
10 circuits25Lighting Installation26Recessed Lighting Installation27Ceiling Fan Installation28Landscape Lighting Installation29Security & Flood Lighting30LED Lighting Retrofit31Dimmer & Smart Switch Installation32Bathroom Exhaust Fan Installation33Attic & Whole-House Fan Installation34Permanent Outdoor Lighting Installation
Wiring & Safety
10 circuitsOutdoor & Commercial
10 circuitsDo not wait on these
Warning signs that deserve a call today
- Warm or discolored cover plateHeat at an outlet or switch plate means a connection is failing behind it. The CPSC lists it as an aluminum-wiring warning sign.
- Burning or hot-plastic smellSwitch the circuit off at the panel if you can reach it safely and call. We send this call first.
- Lights dim when the AC startsA shared neutral, a loose service connection or an undersized service. It gets worse, not better.
- Buzzing or crackling at the panelArcing at a breaker or a bus stab. Federal Pacific and Zinsco panels are common culprits in older OKC homes.
- A breaker that trips and will not resetStop resetting it. Repeated resets on a fault heat the breaker and the wire it protects.
- Scorch marks on a plug or outletEvidence of arcing. Unplug what you can and leave that outlet dead until it is checked.
- Shocks from a faucet or applianceA grounding or bonding problem. Treat it as urgent, especially near water.
Oklahoma City conditions
Old wiring and hard weather, in the same house
Two things shape electrical work in Oklahoma City more than anything else: the age of the housing and the weather. The median home here dates to 1982, so a large share of the calls we take are 1960s and 70s ranches carrying their original 100-amp service, backstabbed outlets, and in some cases aluminum branch wiring from the 1965 to 1973 window. Those homes were wired for a window unit and a range, not for a 40-amp EV charger and a heat pump on top of central air.
Then there is the weather. The October 2020 ice storm left more than 300,000 customers dark and Oklahoma City was still restoring tens of thousands of connections eleven days later. Every spring the severe season runs from mid-April into June, and lightning is a real cause of the fried garage door openers and dead HVAC boards we see afterward. That is why standby generators, transfer switches and whole-home surge protection have become everyday jobs rather than luxuries.
In the historic districts around Heritage Hills and Mesta Park the problem is older still. Houses from the 1906 to 1930 boom often hide knob-and-tube behind newer drywall, and exterior changes such as a new meter location go through the Historic Preservation Commission. We plan those jobs with the paperwork in mind so the inspection is a formality.
Where we work
Two offices, one metro
Most of our residential work sits inside the Oklahoma City limits, with the service office on the south side of the city and the head office in Bethany on the northwest edge of the metro. From those two points the same crews reach Warr Acres, The Village, Del City, Midwest City and Moore in ordinary drive times, and Edmond, Yukon, Mustang and Norman a little further out. The Service Area page explains where coverage is strongest, where response takes longer, and what falls outside it.
What happens after you call
From the first ring to the labeled panel
- You call, a person answers
The line is staffed around the clock. Describe what you see, smell or hear and we tell you whether to kill the breaker before we arrive.
- Diagnosis before parts
A tripping breaker gets a load reading and a thermal check, not a new breaker on a guess. You get the cause in plain words before any price.
- Written scope and price
For anything past a simple repair, you get the scope, the parts, and whether a permit is involved, before we start.
- Permit and inspection when required
Panel changes, new circuits, generators and EV chargers go through OKC Development Services. We file it and meet the inspector.
- Clean up and label
Circuits get labeled, covers go back on, and you get a walk-through of what changed and what to watch.
How we work
Four things that do not change from job to job
Answered around the clock
One number, day or night. The same crews take the 2 a.m. burning-smell call and the Tuesday panel upgrade.
South OKC and Bethany
The service office on Kelham handles the city; the Bethany head office anchors the northwest metro.
Fault found before parts are quoted
Every repair starts with testing. Replacing what failed without asking why is how the same call comes back in a month.
Filed where the job needs one
Service upgrades, new circuits, chargers and generators get permitted and inspected. It is how the work stays insurable.
Something sparking, smelling hot or half dark?
Kill the breaker if you can reach it safely, then call. The line is answered around the clock and the first available electrician rolls from the south OKC service office.
Learning center
Guides from the same crew that answers the phone
Plain answers to the questions we hear most, with cost figures from published sources. See all 16 guides.
What a panel upgrade costs
Sourced 2026 ranges, what pushes a quote up, and when a subpanel or load management does the job instead.
Read the guideBreaker keeps tripping?
What to check in the first five minutes, the four usual causes, and when to stop resetting it.
Read the guideStorm season electrical prep
Surge protection, backup power and the service entrance check that shortens the next outage.
Read the guideQuestions we hear on the phone
Straight answers before you book
Calls are answered 24/7 and dispatched from the service office on the south side of the city. Burning smells, sparking and a dead panel go first; planned work is scheduled at a time that suits you. When every truck is out we tell you the honest window rather than a hopeful one.
Yes. In Oklahoma City, service upgrades, new circuits, EV charger circuits and generator installs are permitted through OKC Development Services and inspected. We file the permit and meet the inspector; you do not have to manage any of it.
It can be. A breaker that trips under a heavy load is doing its job, but one that trips at random, will not reset, or feels warm points to a wiring fault or a failing breaker. Stop resetting it and have the circuit tested.
That is one of the most common panel jobs we do in the metro. Federal Pacific Stab-Lok and Zinsco panels have breakers that can fail to trip. Replacement is a same-amperage swap or an upgrade to 200 amps, depending on what the house needs.
We install Generac and Kohler air-cooled standby units, on natural gas where it is available and propane where it is not. We also set up interlock kits and manual transfer switches for homeowners who already own a portable unit.
Yes. Bethany is home to the head office, and the northwest metro is covered from there. Edmond, Moore, Yukon, Mustang and Norman are regular stops. The Service Area page shows where response is fastest.
Homes built between 1965 and 1973 may have single-strand aluminum branch circuits. The permanent fix the CPSC recognizes is a COPALUM crimp at every connection; AlumiConn connectors are the alternative. We test the connections first and price the repair by device count.
Talk to an Oklahoma City electrician now
One number for emergencies and planned work, answered 24 hours a day. Tell the person who picks up what you are seeing and we take it from there.